Standard Specifications for Highway Construction serves as a standard reference in construction contracts. Primarily, the specifications set forth minimum requirements which are consistent with the current practice. Certain modifications necessary to suit local conditions are specified in Special Provisions of the contracts.
The 2012 Standard Specifications for Highway Construction is completed and is adopted November 1, 2011.
Amendments
Amended Sections to the 2012 Standard Specifications
- Section 101 — Quality Management (December 20, 2011)
- Section 145 — General Requirements for Highway, Bridge and Marine Construction (December 20, 2011)
- Section 201 — Roadway and Drainage Excavation Section 204 — Rock Cuts (December 20, 2011)
- SS202 TABLE 202-C - Aggregate Gradations - Page (5 of 14) (December 1, 2011)
- Section 204 — Rock Cuts (December 20, 2011)
- Section 205 — Table 205-C — Recommeneded Tests for Riprap (April 11, 2012)
- Section 415 — Manufacture and Erection of Precast and Precast Prestressed Concrete Members (December 20, 2011)
- SS 502 TABLE 502-H – Payment Adjustments for Material Application Rate - Page (21 of 32) - Table H (November 1, 2011)
- Section 635 – Electrical and Signing – SP 635-1.1.27
(16-25M REINFORCING STEEL BARS) changed to
(20M REINFORCING STEEL BARS ON BOTTOM) see amended drawing (Page 42 0f 270)
(February 23, 2012)
Special Provisions Appendix for Amendments to the
2012 Standard Specifications for Highway Construction
The 2009 Standard Specifications for Highway Construction is completed and is adopted October 1, 2008.
Amendments
Amended Sections to the 2009 Standard Specifications
Special Provisions Appendix for Amendments to the
2009 Standard Specifications for Highway Construction
Amendments
Design Build Standard Specifications
Design Build Standard Specifications June 1, 2009
Amendments
Amended Sections to the 2009 Design Build Standard Specifications
Design Build Standard Specifications December 19, 2007
Design Build SECTION 415 Manufacture and Erection of Precast and Prestressed Concrete Members, Suggested Organization Chart on page 14 has been revised
Design Build SECTION 421 Structural Steel Work, Suggested Organization Chart on page 14 has been revised
Design Build Standard Specifications Feb. 20, 2006
NOTICE TO MINISTRY STAFF AND CONTRACTORS
DESIGN BUILD STANDARD SPECIFICATION (February 20, 2006)
SECTION 211 PORTLAND CEMENT CONCRETE
Page 1 of 23 -
The right hand column of page one is out of order. The top of the right hand column:
"materials, mix design proportioning, sampling and testing of the materials and concrete, batching, mixing, transporting, placement, finishing and curing. The Contractor shall supply all necessary materials." Along with "Section 211.02 Applicable Standards. The standards listed in Table 211-A shall apply unless specified otherwise herein. All referenced standards shall be to the current editions at time of Award."
should continue with section 211.01 General (left hand column) before Table 211-A Applicable Standards.
The remaining portion of the right column, starting with "submit a report outlining the proposed mix design for each classification of concrete to the Ministry……" returns to continue with 211.03.04 after the text "The Designer shall"..
Design
Build Minor Specifications 2004
For a printed copy of these documents, please order from our British Columbia Publications Services.
Ministry customers please have your Customer Number and Postal Code ready, or follow the instructions to obtain a customer number.
General public customers please enter your keyword, click the search button and follow the instructions.
Standard Specifications for Highway
Construction
- KEYWORD (2003): 7680001856
- KEYWORD (2004): 7680001898
- KEYWORD (2005): 7680002028
- KEYWORD (2009): 7680002870
Design Build Minor
Specifications 2004
- KEYWORD (2004): 7680001976
Design Build Minor Specifications 2006
- KEYWORD (2006): 7680002130
|
